Salus FC600 - Page 55

55 Fan Coil FC600 Instruction Manual
Parameter
number
Type of setting Description Default
Values
d30 Protection cooling
set point
OFF or from 5⁰C to 40⁰C Off
d31 Temperature display
resolution
This setting allows you change the temperature display
resolution.
0 = 0.1⁰C
1 = 0.5⁰C
1
d32 Cooling start delay From 0 to 15 minutes 0
d33 Clock format 0 = 12h
1 = 24h
1
d34 ECO mode or
STANDBY mode.
When S2/COM
terminals are short –
thermostat will go to
ECO mode or
STANDBY mode.
0 = ECO mode
1 = STANDBY mode
For example when hotel card is in (occupancy sensor
indicates that person is in the room) – the thermostat
will go to ECO mode if you select ”0”, or go to STANDBY
model if you select ”1”(for details, please see below)
0
d35 OFFSET of the second
sensor connected do
S2/COM (parameter
available only when
d03 = 2)
From -3⁰C to +3⁰C 0⁰C
d36 Status after power
breakdown
After the power is on, the thermostat will function in
0 = standby
1 = last configuration
0
d37 To allow user unlock
the keys
or NOT
1 = means user can unlock by pressing and
0 = means user can NOT unlock by pressing and
If d37=0, user can lock/unlock the keys, only through the
App.
0
d38 Manual Fan Speed
Operation
0 = Fan always on (doesn’t matter if the Fan Coil is calling
or not for heating or cooling)
1 = FAN works on the speed set manually, only when the
Fan Coil is calling for heating or cool
1
d39 FAN turning ON delay 0 seconds to 30 minutes 0
d40 FAN turning OFF delay 0 seconds to 30 minutes 0
d41 Valve control when
FAN is manually OFF
0 – (default) no valve control when fan is MANUALLY off
1 – still use valve control when fan is MANUALLY off
Note: Setting d00, d01, d02, d03,d04 CANNOT be changed in installer menu, neither on the device or on the
app. They depend on your initial setup and on the configuration of your system and can be changed only
when you will reinstall/make changes to you fancoil or system.Some parameter will be visible/invisible in
depend of the MAIN parameters setting (d01,d02,d03,d04, programmable, non-programmable).