Installation and Operation
SAM4S ER-350 SERIES 3-5
3-3 Operation
Note: Before using this Electronic Cash Register(ECR) for the first time, leave it powered ON in the
REG mode for a at least 24 hours. This allows the Ni-Cad battery, which maintains the ECR’s
memory while the power is OFF, to fully charge.
3-3-1 Mode Switch
The position of the Mode Switch determines the action of the ECR. The modes are as shown in Table 3-1
Figure3-9 Mode Switch Table3-1 Mode Switch Function
The mode keys can be used to access the following key lock positions
Mode Accessible Position Remark
VOID Void, Off, Register, Manager
X Off, Register, Manager
Z Off, Register, Manager, Clear Totals
PGM Void, Off, Register, Manager, Clear Totals, Program
S Void, Off, Register, Manager, Clear Totals, Program, Service Mode
Table3-2 Key Function
Note : The Key can be removed from the key lock in the OFF or REGISTER position.
Mode Key Function
VOID VD Use to void (correct) items outside of a sale.
OFF - The Register is inoperable.
REG REG Use for normal registrations.
X X
Use to read register reports and perform other manager
functions.
Z Z Use to read register reports and reset totals to zero.
PGM P Use to program the register
S C Use for H/W tests and special setting.
REG
X
Z
PGM
S
OFF
OID
To Next Page
Loading...
