Print Option Programming
Refer to the “Print Option Table” to review the print options. Read each option carefully to
determine if you wish to make any changes.
NOTE: You do not need to program this section unless you wish to change the default status.
Programming a Print Option:
1. Turn the control lock to the PGM position.
2. Enter 4 0, press the SBTL key.
3. Enter a print option address, then press the QTY/TIME key.
4. Enter the number representing the status you have selected or if there is
more than one decision to be made in an address, add the values
representing your choices for each decision and enter the sum.
5. Press the SBTL key.
6. Repeat from step 3 for each print option that you wish to change.
7. Press the CASH key to end print option programming.
Print Option Flowchart
To Next Page
Loading...
