14
Gcube Series Receipt Printer
1.8. Using the Printer
1.8.1. Control Panel
POWER
LINK
DATA
1.8.2. Button
•POWER Button
Press the POWER button to turn on the printer. "-"is displayed on the
FND.
•FEED Button
Press the FEED button once to advance paper one line. You can also
hold down the FEED button to feed paper continuously.
The button can be disabled by the ESC c 5 command.
1.8.3. Panel lights : FND
•ERROR FND
This indicates when there is " Power on" error or no receipt paper left/
almost used up. For detailed error type, kindly refer 2-3 Error Status and
Erro Resolution on page <18-19>.
To Next Page
Loading...
Need help?
General
