18
G Series Receipt Printer
When the printer error occurs, the alphabet corresponding to the error
condition is shown on FND
Error Status Indicator includes:
• Cutter Jam
When ERROR FND indicates "J",
the printer is on Cutter Jam error
status.
»
Solution
While the printer is turned on
(the Power LED is on,) press
the cover button and open the
cover. Then, the cutter will
automatically reset.
• Cutter Not Home
When ERROR FND indicates "
J", it means the cutter is not in
Home position while the pirnter
is on.
»
Solution
Same solution as Cutter Jam error.
OPEN
2.3. Error Status and Error Resolution
To Next Page
Loading...
