OPERATOR’S Manual
19
CHAPTER 2
When the printer error occurs, the alphabet corresponding to the error
condition is shown on FND
Error Status Indicator includes:
2.3. Error Status and Error Resolution
•Paper Out Error
The buzzer beeps “ Beep---,Beep---” and When the printer cover open by
pressing the cover open button, the buzzer will stop. After this, you may
change the paper roll and continue using the printer.
•Cover Open
This error occurs when the printer cover is open.
Closing the cover will clear the error.
•Replace paper
This error occurs when the paper needs to be replaced.
•Overheat
This error occurs when the print head is overheated. Printing stops with
an overtemperature error. When the printer head cools down, the error is
cleared and printing continues.
To Next Page
Loading...
Need help?
General
