OPERATOR’S Manual
7
CHAPTER 1
Your printer box should include these items. If any items are damaged or missing,
please contact your dealer for assistance.
Gcube Series
Interface cable(option) Power-cord Roll paper
AC Adapter
Operator’s
Manual(option)
User Guide
Gcube Series
Receipt Printer
All specifications are subject to change without notice.
Setting Up the
Printer
1.1. Unpacking
You can connect up to three cables to the printer. They are all connected to
the connector panel on the back of the printer, which is shown as below:
USB
connector
Serial connector Drawer Kick-
out connector
Power supply
connector
NOTES : Before connecting any of the cables, make sure the both printer and
connecting device are turned off.
1.2. Connecting the Cables
1
CHAPTER
Ethernet
connector
To Next Page
Loading...
Need help?
General
