Getting Started SER-7000 Program Manual
Key Descriptions
Essential Function Keys
Because the SAM4S SER-7000 keyboard is programmable, you can use the default keyboard,
you can modify it, or you can design a keyboard that fits your exact needs.
In order to program and operate the SAM4S SER-7000, you must place all of the
following keys on every keyboard:
x Numeric Keys 0-9
x CLEAR
x Y/N
x ENTER
x Cursor Control Keys
x PAGE UP/PAGE DOWN
x DONE
x @/FOR
x EMP#
Notes: Moving essential keys is not advised. When programming an alpha field with
the alpha overlay, the essential keys will shift back to their original position as part of
the alpha overlay.
You cannot change the assignment of an essential key (i.e. numeric key, Y/N, cursor
keys, ENTER, etc.) unless it is first located in a different position on the keyboard.
Many function keys have programming options. See "Function Key" programming in "P-
Mode Programming" for individual function key programming options.
Function Key List
Key Description
0 - 9, 00, 000
(Numeric Keys)
Used in all modes to enter numeric information such as prices or quantities.
ADD CHECK
Use to add multiple guest checks (tracking balances or soft checks) for
payment together. See "TRAY SUBTL" on page 11 to add separate
transactions when you are not tracking balances.
ALPHA TEXT
Use to type a name or message that will be associated with a soft check.
Press the ALPHA TEXT key anytime after a check has been opened, then
type a message (up to 15 characters) using the alpha keyboard overlay and
press ENTER. The message is saved and printed/displayed with the order.
To Next Page
Loading...
