Sam4s SER-7000 - 1. a D D & C H a N G E; Delete Plus

SER-7000 Program Manual P-Mode Programming
x
65
Delete PLUs
PLU PROGRAMMING
1. ADD & CHANGE
1.PLU DELETE ONE BY ONE
2.PLU DELET BY RANGE
ESC ENTER PAGE UP/DN
np
1. From the PLU
PROGRAMMING
SCREEN, select
DELETE.
2. Press a numeric digit
(1-2) or press the
n
or
p
keys to move the
cursor to PLU
DELETE ONE BY
ONE or PLU
DELETE BY
RANGE, then press
ENTER.
PLU Delete One By One
PLU DELETE PLU#00000000000000
DESCRIPTOR :
PLU# ESC ENTER INDIVIDUAL PLU
1. Type the PLU
number to be deleted,
press ENTER.
2. The message PRESS
ENTER TO DELETE
displays. Press
ENTER again, or
press ESC to exit
without deleting the
PLU.
3. Continue from step 2
if there are additional
PLUs to delete, or
press ESC to return
to the PLU
PROGRAMMING
screen.