P-Mode Programming SER-7000 Program Manual
Copy Program
This function allows you to duplicate programs for:
x PLUs
x PLU Status Groups
x Keyboard Levels
x WLUs
For example, all program options for one PLU can be duplicated on another PLU.
NOTE: See “General Function Options” on page 57. If General Function Option #16
“ALLOW PLU COPY BY RANGE” is set to “Y”, then the options from one PLU or
PLU Status Group can be copied to a range of PLUs or PLU Status Groups. If option
#18 is set to “N” then the options from an individual PLU or PLU Status Group can be
copied only to another individual PLU or PLU Status Group.
COPY PROGRAM
1. COPY PLU
2. COPY PLU STATUS GROUP
3. COPY KEYBOARD LEVEL
4. COPY WLU
5. COPY GROUPS BY EMPLOYEE
N
np
1. Select COPY
PROGRAM from the
P-MODE menu to
display the COPY
PROGRAM screen.
2. Choose
x COPY PLU
x COPY PLU STATUS
GROUP
x COPY KEYBOARD
LEVEL, or
x COPY WLU from the
list.
To Next Page
Loading...
