Sam4s SER-7000 - Logo Message

140
x
P-Mode Programming SER-7000 Program Manual
Logo Message
LOGO MESSAGE PROGRAMMING
JUSTIFY:
CENTER

PREAMBLE #1:
PREAMBLE #2:
LOGO MESSAGE PROGRAMMING ALPHA
PREAMBLE #3:
PREAMBLE #4:
PREAMBLE #5:
!
LOGO MESSAGE PROGRAMMING ALPHA
POSTAMBLE #1:
POSTAMBLE #2:
POSTAMBLE #3:
!
LOGO MESSAGE PROGRAMMING ALPHA
POSTAMBLE #4:
POSTAMBLE #5:

1. Choose LOGO
MESSAGE to display
the LOGO
MESSAGE
PROGRAMMING
screen.
2. Set the JUSTIFY
option to center, left
or right justify your
message.
3. Type the preamble
message in the space
provided, up to 40
characters per line.
Press the
n p m o
keys to move the
cursor to a new
position.
4. Press PAGE DN to
program the logo
postamble. Type the
message in the space
provided. Up to 40
characters per line.
Press the
n p m o
keys to move the
cursor to a new
position.
5. Press ESC to exit the
screen and return to
the MESSAGES
MENU screen.