Sam4s SER-7000 - WLU Programming

148
x
P-Mode Programming SER-7000 Program Manual
WLU Programming
The first step in WLU programming is to select individual options for the WLU. Next, a list
of items (Condiments, PLUs and/or functions) is assigned.
WLU#01 PROGRAMMING
1. TITLE : WLU#1
2. ALLOW CONDIMENT N
ALLOW PLU N
ALLOW FUNCTIONS N
3. # OF ITEM CHOICE(0=UNLIMIT)00
4. ITEM MULTIPLICATION N
ESC Y/N ENTER PAGE UP/DN
npom
WLU#01 PROGRAMMING
5. EXIT FROM TABLE WITH DONE Y
6. LINK TO WLU# (0=NO LINK) 00
EDIT ITEMS


ESC Y/N ENTER PAGE UP/DN
npom
1. Select WINDOW
LOOK UP (WLU)
from the P-MODE
PROGRAMMING
MENU to display the
WLU#
PROGRAMMING
Screen.
2. Type the WLU
number and press
ENTER, or press
PAGE UP or PAGE
DN to scroll to the
WLU you wish to
program.
3. Press the
n p m o
keys to select a field
to edit:
 For yes/no fields,
press the Y/N key to
toggle from yes to no.
 For numeric fields,
type new value.
WLU Program Notes
# Field Notes
1 TITLE
Enter a descriptor up to 12 characters in
length.
2 ALLOW CONDIMENTS
ALLOW PLU
ALLOW FUNCTIONS
Select Y or N to determine the type of items
that are allowed to display on the WLU. For
example, if you select N for ALLOW
FUNCTIONS, you cannot add a function to
this WLU.