Sam4s SER-7000 - Groups by Employee

206
x
P-Mode Programming SER-7000 Program Manual
Groups By Employee
If you choose to use groups by employee (see "Memory Allocation" on page 36) you can
select which of the 99 available groups are reported for each employee. For example, you
may wish to report only food related groups for servers and beverage related groups for
bartenders.
GROUPS BY EMPLOYEE# 01 PROG
#
GROUP# DESCRIPTOR
01 00
02 00
03 00
ESC Y/N ENTER PAGE UP/DN
npom
1. Select GROUPS BY
EMPLOYEE from
the P-MODE
PROGRAMMING
MENU to display the
GROUPS BY
EMPLOYEE Screen.
2. Type the
EMPLOYEE number
and press ENTER, or
press PAGE UP or
PAGE DN to scroll
to the Employee you
wish to program.
3. Press the p to
advance the cursor to
the GROUP# field for
group #01.
4. Type the number of
the group you wish to
report, press ENTER.
The descriptor for the
group will
automatically fill the
DESCRIPTOR field.
5. Continue to program
group selections for
up to 30 possible
reporting groups.
Press PAGE UP or
PAGE DN as
necessary to view all
30 groups.
6. Press ESC to exit the
GROUPS BY
EMPLOYEE
program screen