Sam4s SER-7000 - Drawer Test; RTC Setting (Real Time Clock)

24
x
S-Mode Programming SER-7000 Program Manual
Drawer Test
FIRST DRAWER
SECOND DRAWER
DRAWER COMPULSORY
DRAWER 1 CLOSED
DRAWER 2 CLOSED
1. Select DRAWER
from the H/W TEST
MENU.
2. Power off the register
and install a drawer at
the ports you wish to
test.
3. The screen will
display "FIRST
DRAWER" and
"SECOND
DRAWER" in
sequence. Each
connected drawer
should open as it is
displayed.
4. Press any key to
return to the H/W
TEST MENU.
RTC Setting (Real Time Clock)
ENTER DATE/TIME YYYYMMDDHHMMSS
1. Select RTC
SETTING from the
H/W TEST MENU to
set the system clock
and calendar.
2. Type the current
year/month/day/
hour/minute
/second, press
ENTER.
3. Press any key to
return to the H/W
TEST MENU.