Sam4s SER-7000 - Key Prompting

12
x
Getting Started SER-7000 Program Manual
Key Prompting
While you are programming the SER-7000, the bottom line of the screen displays the keys
that you are allowed to use next. (These prompts do not display on the operator screen in
the REG control lock position, or in manager operations.)
For example, turn the key to the P position to view the P-MODE PROGRAMMING MENU:
P-MODE PROGRAMMING MENU
1. PLU
2. PLU STATUS GROUP
3. GROUP
4. FUNCTION KEY
5. SYSTEM OPTION
6. TAXES
ENTER PAGE UP/DN
np
Function keys that you
are allowed to use are
displayed at the bottom
of the screen.