2. HOURS PER OVERTIME STARTS 008
3. OVERTIME FACTOR 1.5
4. COMP OUT FOR BREAK OR OUT Y
5. TIP REPORTING % OF SAL15.0000
6. EMP. TIME-IN/O EMPLOYEE#
ESC Y/N ENTER PAGE UP/DN
npom
1. Select TIME
KEEPING OPTIONS
from the SYSTEM
OPTION
PROGRAMMING
screen. The time
keeping options
display with the first
option field selected.
(There is one page of
time keeping
options.)
2. Select fields and
change information in
the same manner as
described for general
options.
Time Keeping Option Program Notes
# FIELD Notes
1 OVERTIME HOUR IS USED F
Select Day or Week for overtime hours.
2 HOURS PER OVERTIME
STARTS
Enter the number of hours that must be
worked per day or week before overtime
starts. For example, if field #1 is day, enter
8 hours, or if field #1 is week, enter 40 hours.
3 OVERTIME FACTOR
Enter the factor times which the standard pay
rate is multiplied to determine overtime pay,
i.e. enter 1.5 if rate is time and one half, or
enter 2.0 if rate is double time.
4 COMP OUT FOR BREAK OR
OUT
When clocking out there is a choice for [OUT
FOR BREAK] or [OUT]. If Y, you must
enter the appropriate number for either
choice, rather than just pressing ENTER to
choose the default.
5 TIP REPORTING % OF SAL
If Y, the percentage entered here is calculated
and reported on the Employee report.
6 EMPLOYEE TIME-IN/O
Select Employee # or Secret Code.
To Next Page
Loading...
