Sam4s SER-7000 - Product MIX Group Time Periods

SER-7000 Program Manual P-Mode Programming
x
183
Product Mix Group Time Periods
Memory allocation determines whether there are 24, 48, or 96 product mix group time
periods. Product mix group time periods will default to hourly periods if 24 periods are
selected in memory allocation; 30-minute periods if 48 periods are selected; 15-minute
periods if 96 periods are selected.
Periods can be set to custom lengths using this program. If fewer periods are needed than
are available, unneeded periods can be inactivated so that they will not appear on reports.
To inactivate a period replace the "A" (active) for the period with an "I" (inactive).
All time units are based upon a 24-hour clock (military time).
PRODUCT MIX TIME PERIOD PGM
# OF PERIODS SET IN MEMORY : 24
1 Y 0000-0059 6 Y 0500-0559
2 Y 0100-0159 7 Y 0600-0659
3 Y 0200-0359 8 Y 0700-0759
4 Y 0300-0359 9 Y 0800-0859
5 Y 0400-0459 10 Y 0900-0959
ESC Y/N ENTER PAGE UP/DN
npom
1. Select PRODUCT
MIX GROUP TIME
PERIODS from the
PRODUCT MIX
GROUPS MENU to
display the
PRODUCT MIX
TIME PERIOD
PROGRAMMING
screen.
2. Press the
n p m o
keys to select a field
to edit.
3. Type new
information into the
field. Press
ENTER.
4. Press ESC to exit the
PRODUCT MIX
TIME PERIOD
PROGRAMMING
screen.