Sam4s SER-7000 - System Options

48
x
S-Mode Programming SER-7000 Program Manual
System Options
S-MODE SYSTEM OPTIONS
1. REGISTER # (01-32) 01
2. STORE # 000000
3. IRC : FROM REGISTER # 00
4. IRC : TO REGISTER # 00
5. IRC # OF RETRIES 00
6. PRT/DISP DECIMAL POSITION: 2
ESC Y/N ENTER PAGE UP/DN
npom
S-MODE SYSTEM OPTIONS
7. PASSWORD (0000=NONE): X =0000
Z1=0000
Z2=0000
Z3=0000
Z4=0000
Z5=0000
! ESC Y/N ENTER PAGE UP/DN
npom
S-MODE SYSTEM OPTIONS
8. REG# HOLDS CHECK TRACK DATA
CHECK#1 00
CHECK#2 00
CHECK#3 00
CHECK#4 00
9. REG HOLDS TIME IN/OUT DATA 00
! ESC Y/N ENTER PAGE UP/DN
npom
1. Select SYSTEM
OPTIONS from the
S-MODE
PROGRAMMING
MENU to display the
S-MODE SYSTEM
OPTIONS Screen.
2. Press the
n p m o
keys to select a field
to edit.
3. Type a new value and
press ENTER or
press the
p
key to
accept the entry and
advance to the next
field.
4. Press PAGE DN to
view the second page
of S-MODE
SYSTEM OPTIONS.
5. Press PAGE DN to
view the last page of
S-MODE SYSTEM
OPTIONS.
6. Press ESC to exit.
S-MODE SYSTEM OPTIONS
10.REG HOLDS BACKUP CHK TRK DATA
CHECK#1 00
CHECK#2 00
CHECK#3 00
CHECK#4 00
11.REG HOLDS KP GLOBAL ORDER# 00
! ESC Y/N ENTER PAGE UP/DN
npom