P-Mode Programming SER-7000 Program Manual
Currency Conversion 1-5
FUNC. KEY #026 PROGRAMMING
DEFAULT DESC: CURR.CONV1
DESCRIPTOR: CURR.CONV1
RATE 00.000000
CHANGE IN FOREIGN CURRENCY N
LINKED DRAWER # (0-2) 0
ESC Y/N ENT PAGE UP/DN
npom
Currency Conversion Key Program Notes
FIELD Notes
RATE
The value of foreign currency can be express in two
ways: foreign currency in US dollars, and the inverse,
US dollars in foreign currency. For example a
Canadian dollar may be worth $.70 US. The inverse
of that value statement would be that a US dollar is
worth $1.428571 Canadian dollars. Look for the rate
expressed as US dollars in foreign currency (i.e.
$1.428571 as in the example above) and enter that
value in this field. Note: this field can contain 8
digits, with the decimal in any position. For example,
you can enter 4 digits, the decimal, and four fractional
digits.
CHANGE IN FOREIGN
CURRENCY
Select whether any change from an over-tender is
issued in foreign currency (Y) or home currency (N).
LINKED DRAWER #
(0-3)
Select the drawer to be opened on foreign currency
tender transactions.
To Next Page
Loading...
