- 12 - SPS-500
DISPLAY MESSAGES
Enter Employee #
The employee is required to sign on before performing a task.
Enter Guest Count
The operator must enter the number of guests when opening a guest check, or beginning a sale.
Enter Seat#
Seat number entry is required before operation can continue.
Enter Table#
Table number entry is required to open a guest check, or begin sale.
Entry Required
The function selected from the WLU requires a numeric entry, i.e. an open percent discount.
Error
General error message, indicating mis-operation
Error Jam
Receipt / journal printer jammed message. Remove the paper jam.
Table Number In Use
The system is programmed to allow only one check number per table, and an attempt has been made to use the
same table number twice.
Halo Over
The amount entered exceeds the programmed HALO i.e. the task exceeds the maximum amount allowed.
Illegal Key Sequence
The operator has used an illegal key sequence.
In Use
This guest check or clerk number is already open elsewhere in the system. This is also applicable when the floating
clerk system is activated and the operator is in use on another terminal.
Inactive
The key pressed is inactive. This message also appears if VOID Mode has been disabled.
Input Qty
Quantity input is required for a condiment WLU
Kitchen Printer Failure
The kitchen printer has failed to respond. Printing has been re-routed to the designated back-up printer
Manager Override Required
The key lock should be moved to the X-Mode position in order to override a HALO amount, or other restriction.
Manager Required
This operation requires the key to be turned to the X position.
To Next Page
Loading...
