- 15 - SPS-500
DISPLAY MESSAGES
Override Not Allowed
The clerk has attempted a manual numeric entry such as manual PLU price, but has been disallowed within the
system settings program option.
Wrong Sequence
The attempted key sequence is incorrect
Wrong Command
The attempt command sequence is invalid for this operation
Wrong File Number
The file number accessed is incorrect, for example when sending program IRC this may be printed if two file sizes
are not identical.
Wrong Itemiser
An attempt has been made to print a report for sales totals that do not exist, for example an attempt to print a Z2
report when only Z1 has been allocated in memory.
Under Tender Not Allowed
An attempt to pay the sale with a value less than the subtotal has been made against a tender key. Tender the exact
amount or more than the subtotal value
Over Tender Not Allowed
An attempt to pay the sale with a value greater than the subtotal has been made against a tender key. Tender the
exact amount or less than the subtotal value
Check Tracking Error
An attempt to access one of the four check tracking files has failed, either the service mode option, has not been set
to determine which register is storing the check tracking data, or within register the check has been accessed using
one check tracking file and an attempt to store against another is made.
Using
The check or clerk number is in use on another register.
PLU Not Allowed
The PLU has been programmed as disallowed in the key sequence
Condiment PLU Not Allowed
An attempt to sell a condiment PLU without first selling the main product has been made.
Non Condiment PLU Not Allowed
The last PLU sold, was programmed to enforce the sale of a condiment PLU, and the next product was not a
condiment-flagged item.
Function Key Not Allowed
The function key attempted is not allowed as part of this key sequence.
This Key Is Not Allowed
An invalid key press has been attempted.
No Function Key
An attempt to recall a function that is not a designated function key has been made.
To Next Page
Loading...
