Sam4s SPS-500 - Adding to a Check

- 96 - SPS-500
Adding to a Check
Check Method:
Enter the check number, press
the appropriate recall check
function, i.e. RECALL #1,or
Table Method:
Enter the table number, press the
appropriate Table # function, i.e.
TABLE 1.
EMPLOYEE 1 .
C1 /T 6/G 2
P/BAL 0.00
1 PLU4 4.00
1 PLU5 5.00
TTL 9.00
PO1 ROn REG01
If Multiple Check are open for the
Table the checks will be listed:
Press the ↑ or ↓ keys to select the
check you wish to open.
EMPLOYEE 1 .
PAYMENT
6 10 2 EMPLOYEE 1201 5.00
2 11 2 EMPLOYEE 1205 9.00
PO1 ROn REG01
Press ENTER.
EMPLOYEE 1 .
C1 /T 6/G 2
P/BAL 9.00
TTL 9.00
PO1 ROn REG01