Sam4s SPS-500 - Hard Check Posting

- 93 - SPS-500
HARD CHECK POSTING
With "hard check" posting, only current balances are stored in memory.
Procedures and options relating to beginning, adding to and paying a check are the same on "hard" and "soft" check
posting, except it is necessary to print an update to the check at each posting. Note that when a hard check is
recalled, the previous balance is displayed. (Where in soft check posting the previously registered items are
recalled.)
Recalling a Hard Check
Depending on the method used
Enter check number, press
CHECK #, or
Enter table number,
press TABLE #.
Note that the previous balance is
displayed.
EMPLOYEE 1 .
C1 /T 6/G 2
P/BAL 0.00
TTL 0.00
PO1 ROn REG01