- 22 - SPS-500
DISPLAY MESSAGES
No Clerk Buffer In This Reg
The clerk sales data are held on another register within the network as set within the service options.
Not Allowed With Open Clerks
The procedure can not be completed whilst there are sales against a clerk, finalize all outstanding sales, then print
the report
Not Enough Money
A sale finalization has been attempted for a smart card which has insufficient funds
Amount Too Big
The value entered to be added to the card, will reach the cards preset maximum limit
Card Not Present
The card should be inserted in the card reader
Card Problem
The smart card cannot be read, there is a problem with the card
Wrong Purse
The smart card allows two purse, one for cash balances, and one for daily allowance. There has been an attempt to
write or read data from the wrong purse
Card Not Open
The smart card information has not been recalled successfully for the sale, re-attempt the procedure
Card Expired
The smart card currently in the reader is past the programmed expiry date. The sales will be refused until the expiry
date on the card is changed or a new card is issued.
Card Hot listed
An attempt to amend or use a hot listed smart card has been made. The card must be deleted from the hot list before
a successful smart card operation can be carried out.
Not Allowed
The attempted sequence is invalid or has been disallowed within the program options
Card Present
There is a card in the smart card reader, this should be removed
Device Already Opened
The device has already been opened.
Device Open Error
The device is unable to open due to an error.
Password Error
The Password entered is incorrect.
Nothing Selected
No selection had been made.
To Next Page
Loading...
