46
VII – ALTERNATING CURRENT CIRCUIT – SWITCHING ON
1 - Turn off the shore power switch on board before
connecting or disconnecting the shore power cable.
2 - Connect the shore power cable to the shore power
input before connecting it to the shore power socket.
3 - If an inversion of polarity is indicated - green light -
immediately disconnect the cable.
4 - First unplug the power cable from the shore power
socket.
5 - Close the cover of the power supply inlet.
6 - Contact a qualified electrician to check the shore
power supply
7 - The on-board installation must not be modified
B – Shore extension cable and safety
Port side engine compartment
To Next Page
Loading...