samhydraulik HCV - 9.9 HNA Control Part List

9.9 DISTINTA REGOLATORE HNA
9.9 HNA CONTROL PART LIST
44
1 ASSIEMATO VALVOLE HNA95 VALVE ASSEMBLY HNA95 1
2 ASSIEMATO SELETTORE HNA95 HCV 100/125 SELECTOR ASSEMBLY HNA95 HCV 100/125 1
3 DISTANZIALE QUADRATO HNA SQUARED SPACER HNA95 1
4 PILOTA HNA HNA PILOT 1
5 DISTANZIALE X VALVOLA DI ALIMENTAZIONE HCV SPACER X FEEDING VALVE HCV 1
6 BUSSOLA VALVOLA HNA95 VALVE BUSHING HNA95 1
7 VALVOLA DI ALIMENTAZIONE X HCV FEEDING VALVE X HCV 1
8 MOLLA X VALVOLA DI ALIMENTAZIONE SPRING X FEEDING VALVE 1
9 GUIDAMOLLA HNA95 SPRING GUIDE HNA95 1
10 SPINA UNI-ISO 8734-5x12-B-St(437.1290.) PIN UNI-ISO 8734-5x12-B-St(437.1290.) 1
11 COPERCHIO X HCV/HNA95 COVER X HCV/HNA95 1
12 VITE TCEI M6x70 UNI 5931 (8.8) SCREW TCEI M6x70 UNI 5931 (8.8) 4
13 VITE TCEI UNI 5931 M6x16 12.9 SCREW TCEI UNI 5931 M6x16 12.9 1
14 DADO ESAG. M6X5 UNI/5588-65/6S SCREW NUT M6X5 UNI/5588-65/6S 2
15 VITE FORATA 1/4" GAS L=47 SCREW WITH HOLE 1/4" GAS L=47 3
16 BULLONE RACCORDO 1/8"G HCV/70 NUT x STUD ADAPTOR 1/8"G HCV/70 5
17 ROND. RAME RIC. D=10.2x16x1.5 (1/8"GAS) SOFT COPPER WASHER D=10.2x16x1.5 (1/8"GAS) 10
18 TUBO DI COLLEG. "PE" HCV 100/125 "HNA 95" PIPE FOR "PE" HCV 100/125 "HNA 95" 1
19 ROND. RAME RIC. 0=13.3x19x1.5 (1/4" GAS) SOFT COPPER WASHER 0=13.3x19x1.5 (1/4" GAS) 3
20 TUBO DI COLLEGAMENTO "PI" HCV/50/70 "HNA 95" PIPE FOR "PI" HCV/50/70 "HNA 95" 1
21 GUARN OR-2062 1.78x15.60 (2-16) SEAL OR-2062 1.78x15.60 (2-16) 3
22 GUARN OR-2106 1.78x26.70 (2-23) SEAL OR-2106 1.78x26.70 (2-23) 1
23 GUARN OR 2-108/0-C=6.02 INT. 2.62 SEAL OR 2-108/0-C=6.02 INT. 2.62 1
24 GUARN OR-2112 1.78x28.30 (2-24) SEAL OR-2112 1.78x28.30 (2-24) 1
25 ROSETTA DI TENUTA GM 2000 M6 SEALING WASHER GM 2000 M6 2
26 GUARN OR-2087 1.78x21.95 (2-20) SEAL OR-2087 1.78x21.95 (2-20) 3
27 VITE STEI UNI 5927 M6x25 P.CONICA SCREW STEI UNI 5923 M6x16 PLANE H. 1
28 SPILLO CONICO HCV TAPERED NEEDLE HCV 1
29 RACCORDO STROZZATORE G1/4" HCV HNA STUD ADAPTOR G1/4" HCV HNA 1
30 TUBO DI COLLEG. HCV PIPE HCV 1
31 ROND. RAME RIC. 0=13.3x19x1.5 (1/4 GAS) SOFT COPPER WASHER 0=13.3x19x1.5 (1/4 GAS) 2
32 VITE TCEI UNI 5931 M6x55-8.8 SCREW TCEI UNI 5931 M6x55-8.8 4
33 COMANDO AUTOMOTIVE AUTOMOTIVE CONTROL 1
34 GUARNIZIONE PILOTAGGIO HCV/50/70/100/125 PILOTING SEAL HCV/50/70/100/125 1
35 SPINA UNI 2338-B-6x10-St PIN UNI 2338-B-6x10-St 2
N DENOMINAZIONE ITEM Q. NOTE