Samson 3374 - Nameplate of the Electric Actuator; Location of the Nameplates; Material Identification Number

2-2 EB 3018 EN
Markings on the device
2.2 Nameplate of the electric
actuator
See associated actuator documentation.
2.3 Location of the nameplates
Location of the
nameplate on
the regulator
components
Location of the
nameplate on
the electric
actuator
Fig.2-2: Nameplate of the valve, diaphragm
actuator and electric actuators
2.4 Material identication
number
2.4.1 Type2423 Valve
See the nameplate (11 for DIN/ANSI ver-
sion, body material) for the material used.
For more details on the nameplate, see sec-
tion2.1.
2.4.2 Type2426 Actuator
Specifying the material number, you can
contact us to nd out which material is used.
It is specied on the nameplate in the 'MNo.'
eld (3 for DIN/ANSI). For more details on
the nameplate, see section2.1.
2.4.3 Electric actuator
Specifying the conguration ID, you can con-
tact us to nd out which material is used. See
associated actuator documentation for more
details on the nameplate.