Samson 3725 series - Mounting Parts and Accessories

4.5 Mounting parts and accessories
26 EB 8394 EN
Attachment to the control valve – Mounting parts and accessories
Table 1 · Direct attachment to Type 3277-5 Actuator (see section 4.1)
Order no.
Mounting parts Mounting parts for actuators 120 cm² or smaller 1402-0239
Accessories for
the actuator
Switchover plate for Type 3277-5xxxxxx.01 Actuator 1400-6822
Connecting plate for additional attachment of, e.g. a solenoid valve: G
1
8
1400-6820
Accessories for
the positioner
Connecting plate (6)
G ¼ 1402-0235
¼ NPT 1402-0236
Pressure gauge bracket (7)
G ¼ 1402-0237
¼ NPT 1402-0238
Pressure gauge mounting kit (8) up to max. 6 bar
(output/supply)
St. steel/brass 1400-6950
St. steel/st. steel 1400-6951
Table 2 · Direct attachment to Type 3277 (see section 4.1.2)
Order no.
Mounting parts Attachment to actuators 240, 350, 355 and 700 cm² 1402-0240
Accessories
Connection block with seals and screw
G ¼ 1402-0241
¼ NPT 1402-0242
Pressure gauge mounting kit up to max. 6 bar
(output/supply)
St. steel/brass 1400-6950
St. steel/st. steel 1400-6951
Table 3 · Attachment to NAMUR ribs according to IEC 60534-6 (see section 4.2)
Travel [mm] Lever For actuators Order no.
3.75 to 50
Without,
already on
positioner
Actuators from other manufacturers and Type 3271 with
120 to 700 cm²
1402-0330
Accessories
Connecting plate
G ¼ 1402-0235
¼ NPT 1402-0236
Pressure gauge bracket
G ¼ 1402-0237
¼ NPT 1402-0238
Pressure gauge mounting kit up to max. 6 bar
(output/supply)
St. steel/brass 1400-6950
St. steel/st. steel 1400-6951