Samson 3730-1 User Manual

Note on these mounting and operating instructions
These mounting and operating instructions assist you in mounting and operating the device
safely. The instructions are binding for handling SAMSON devices.
Î For the safe and proper use of these instructions, read them carefully and keep them for
later reference.
Î If you have any questions about these instructions, contact SAMSON‘s After-sales Service
Department (aftersalesservice@samson.de).
The mounting and operating instructions for the devices are included in
the scope of delivery. The latest documentation is available on our website
at www.samson.de > Service & Support > Downloads > Documentation.
Denition of signal words
Hazardous situations which, if not avoided,
will result in death or serious injury
Hazardous situations which, if not avoided,
could result in death or serious injury
Property damage message or malfunction
Additional information
Recommended action
DANGER
!
WARNING
!
NOTICE
!
Note
Tip
2 EB 8384-1 EN

Samson 3730-1 Specifications

General

Supply air pressure	1.4 to 7 bar (20 to 100 psi)
Housing material	Aluminum
Protection class	IP 65
Output Signal	Pneumatic
Pressure Range	Up to 7 bar (100 psi)
Port Size	G1/4 or 1/4" NPT
Material	Aluminum
Accuracy	±1% of span