Samson 3767 - Annex; Accessories

EB 8355-2 EN 15-1
Annex
15 Annex
15.1 Accessories
Table 15-1: Accessories and mounting kits for direct attachment to Type3277
Lever
Mounting kit
Actuatorsize Lever with associated clamp and intermediate plate Order no.
120cm² D1 lever with stopper for output (38)
Standard version 1400-7116
Versioncompatiblewithpaint 1402-0944
175to750cm² D1lever(33mmlongwith17mmclamp)
Standard version 1400-6370
Versioncompatiblewithpaint 1402-0942
355to750cm² D2lever(44mmlongwith13mmclamp)
Standard version 1400-6371
Versioncompatiblewithpaint 1402-0943
Switchover plates and connecting plates
Order no.
Switchoverplate(for120cm²actuator) Type3277-5xxxxxx.00 Actuator (old) 1400-6819
New switchover plate Type3277-5xxxxxx.01 Actuator (new) or higher 1400-6822
Connecting plate for additional attachment
of, e.g. a solenoid valve
Type3277-5xxxxxx.00Actuator(old),G
1
/
8
Type3277-5xxxxxx.00 Actuator (old),
1
/
8
NPT
1400-6820
1400-6821
New connecting plate
Type3277-5xxxxxx.01 Actuator (new) or higher
G
1
/
8
and
1
/
8
NPT
1400-6823
Note: Only new switchover and connecting plates can be used with new actuators (Index 01). Old and new plates
are not interchangeable.
Requiredconnectionblockfor240,350,355and700cm²actuator
(including gaskets and fastening screw)
G¼ 1400-8819
¼ NPT 1402-0901
Pipe connection
Material Actuatorsize[cm²] Order no.
Requiredpipeconnectionincludingscrewt-
ting
For actuator with "actuator stem retracts" or
with air purging of the top diaphragm cham-
ber
Steel 240 1400-6444
Stainless steel 240 1400-6445
Steel 350 1400-6446
Stainless steel 350 1400-6447
Steel 355/700 1400-6448
Stainless steel 355/700 1400-6449
Range spring
Travel [mm] Actuatorsize[cm²] Order no.
2 (4.5 coils) 7.5 120 to 240 1400-6443
1 (9.5 coils, installed as standard) 10 to 15 120 to 350 1400-6442
2 15 355to750 1400-6443
1 30 355to750 1400-6442