4-140
Troubleshooting
● Possible Cause:
1. Scanner locking switch is locked.
2. Scan motor is broken away.
3. Home sensor is defective.
● Error message : Scanner locking switch is locked or another problem occurred
● Troubleshooting method :
1. Unlock the locking switch.
2. Check if the scan motor is assembled and the harness is connected properly.
3. Check if there is any problem between the CCDM and the shaft.
4. Check if the scan home sensor is operated properly. (service Manual 2.3.3.7 Sensor 48)
● Symptom : Scanner locking switch is locked or Home checking is abnormal.
● Code :11-003
Locking switch
Shaft
CCDM
Motor
To Next Page
Loading...
