4-146
Troubleshooting
● Possible Cause :
There is not enough fax memory.
● Error message :
Too many faxes are received. Print or remove received fax.
Fax memory is full. Print or remove received fax Job
Too many faxes are queued to be sent. Wait or remove queued job.
● Troubleshooting method :
1. To print the received fax job, check the following.
- If there is no paper in tray, load it.
- If the toner cartridge is empty, replace it.
2. Delete the stored fax job. (Document box > System Box > Secured Received Fax )
3. Delete the stored fax job. (Document box > System Box > Send Fax )
● Symptom : Can not execute the Fax function.
● Code :
18-000
18-001
18-002
Delete
Delete
To Next Page
Loading...
