Samsung CLX-8640ND - Finisher Failure #H2-5007. Turn off then On, after Checking Finisher; Finisher Failure #H2-5008. Turn off then On, after Checking Finisher

4.Troubleshooting
►ErrorCode
H2-5007
H2-5008
H2-5099
►Errormessage
FinisherFailure#H2-5007.Turnoffthenon,aftercheckingnisher
FinisherFailure#H2-5008.Turnoffthenon,aftercheckingnisher
FinisherFailure#H2-5099.Turnoffthenon,aftercheckingnisher
►Symptom
ExtensionTrayoperationisabnormal.
►Troubleshootingmethod
1)IstheExtensionTrayHomesensor(S9)working?
a)CheckiftheExtensionTrayhomesensoractuator(JC81-03483B)isabnormality.
b)Checkiftheconnector(SJ108380)ofExtensionTrayhomesensor(S9)isdisconnected.
c)Checkiftheconnector(SJ108310)J8onthenishermainboard(JC81–07242A)isdisconnected.
d)Checkforcontinuityinthewireharnessandwhethertheharnessisdamaged(SJ108310,SJ108380),replaceit
ifrequired.
e)ReplacetheExtensionTrayhomesensor(S9).
f)ReplacetheFinishermainboard(JC81–07242A).
2)IstheExtensionTraymotor(M6)working?
a)Checkiftheconnector(SJ108310)ofExtensionTraymotorisdisconnected.
b)Checkiftheconnector(SJ108310)J6onthenishermainboard(JC81–07242A)isdisconnected.
c)Checkforcontinuityinthewireharnessandwhethertheharnessisdamaged(SJ108310),replaceitifrequired.
d)ReplacetheExtensionTraymotor(M6).
e)ReplacetheFinishermainboard(JC81–07242A).
3)Checkifthegears(SJ105342)areassembledcorrectly.
4)Checkifthetoothofgears(SJ105342)arebroken.Replacethebrokengears.
4-183Copyright©1995-2013SAMSUNG.Allrightsreserved.