109
Multi Control
MENU m → System → Multi Control → ENTER E
Multi Control
ID Setup
ID Input
PC Connection
00
--
RS232C cable
-
The displayed image may differ depending on the model.
Conguring settings for Multi Control
•
ID Setup
Assign an ID to a set. (Range: 0~99)
Press
▲
/
▼
to select a number, and press E.
•
ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
•
PC Connection
Select a method to connect to MDC to receive the MDC signal.
-
RS232C cable
Communicates with the MDC via a RS232C cable.
-
Wi-Fi
Communicate with MDC over Wi-Fi.
To Next Page
Loading...
