77
Fine Tune
(analogue channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
―
This function is only available in Cable mode.
―
Settings are applied to the channel you’re currently watching.
―
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in
the channel banner.
―
To reset the fine-tuning, select Reset.
To Next Page
Loading...
