63
Additional Settings
MENU m → Sound → Additional Settings → ENTER E
Sound
Additional Settings
-
The displayed image may differ depending on the model.
DTV Audio Level
(Digital channels only)
The TV cannot freely control the volume of the digital audio that it sends to the AV receiver. Use this to set the digital audio
volume at a comfortable level.
―
According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.
―
To increase or decrease the volume, adjust between the range 0 and -10 respectively.
Dolby Digital Comp
Some digital TV programmes provide 5.1-channel Dolby audio. This TV converts Dolby audio to stereo audio so that it can play
the sound through the TV’s speakers. There are two methods to choose from. RF is for better sound at lower volumes, and Line
is for higher volumes.
To Next Page
Loading...
