91
Using both DHCP and a fixed IP
simultaneously
Using the Alternate Configuration providing by Windows
Vista, you can set both automatic and fixed IP addresses
and then you can select to use either of them to connect
to the Internet.
1
Click Start > Control Panel > Network and Internet
> Network and Sharing Center and click Manage
Network Connections in the left pane.
2
Right-click over the Local Area Connection and
select Properties.
3
Select Internet Protocol Version 4 (TCP/IPv4) from
the Networking tab and select Properties.
4
Select the Alternate Configuration tab, select User
configured and fill in the corresponding fields.
5
When you have completed the settings, click the OK
button.
To Next Page
