Voice Services
Section 2G. Voice Services 95
Adapting Digit Dialing
Digit Dialing is speaker independent, which means that
no training or adaptation is required. Some users with
heavy accents or unusual voice characteristics may
find difficulty in achieving high accuracy with speaker-
independent Digit Dialing, so the Adapt Digits feature
allows users to dramatically improve the digit accuracy
through adaptation. Users who get acceptable digit
recognition accuracy will find no additional benefit to
performing the Adapt Digit adaptation.
After you adapt Digit Dial, your phone will be
customized to your voice. Other people will not be able
to use Digit Dial on your phone unless they reset the
phone to factory defaults.
Adaptation involves recording several digit sequences
to teach the system your voice. The adaptation process
takes about three minutes.
Tips for Adapting Digit Dial
䢇 Adapt digits in a quiet place.
䢇 Wait for the beep before starting to speak.
䢇 Speak clearly, but say each digit sequence naturally.
䢇 If you make a mistake while recording a sequence of
digits, or if there is an unexpected noise that spoils
the recording, you can say or select “No” when the
prompt asks, “Did the recording sound OK?” You will
then be prompted to record the sequence again.
ASR Options
To change ASR confirmation:
1. Highlight and press > Settings/Tools >
Tools > Voice Service.
2. Press Settings (right softkey) > Confirmation and
select an option:
䡲 Automatic to ask for confirmation only when the
system is not sure what you said.
䡲 Always Confirm to always ask for confirmation.
䡲 Never Confirm to never ask for confirmation.
3. Press to complete the process.
Note
ONLY adapt Digit Dial if the system is frequently
misrecognizing your speech. You can always restore
the system to its original factory setting.
Boost M540.book Page 95 Wednesday, March 24, 2010 4:48 PM
To Next Page
Loading...
