114
General
Button Lock
USB Auto Play Lock
Standby Control
Lamp Schedule
OSD Display
O
O
Auto
O
-
The displayed image may differ depending on the model.
Button Lock
It sets safe lock function.
•
Off / On
This menu can be used to lock the buttons on the product.
Only the remote control can control the product if Button Lock is set to On.
USB Auto Play Lock
Lock USB memory devices to prevent them from being auto detected.
•
Off / On
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
•
On
Power-saving mode will activate if no input signals are detected.
•
Off
The message No Signal will appear if no input signals are detected.
―
The Standby Control option is only enabled when Source is set to HDMI1, HDMI2.
―
If No Signal is displayed although a source device is connected, check the cable connection.
To Next Page
Loading...
