67
Fine Tune
(analogue channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
―
This function is only available in Cable mode.
―
Settings are applied to the channel you’re currently watching.
―
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in
the channel banner.
―
To reset the fine-tuning, select Reset.
Transfer Channel List
Imports or exports the channel map. When the PIN input screen appears, enter the PIN.
You should connect a USB storage device to use this function.
•
Import from USB: Import channel list from USB.
•
Export to USB: Export channel list to USB. This function is available when USB is connected.
Delete CAM Operator Prole
Select the CAM operator to delete.
―
Availability depends on the specific model and area.
To Next Page
Loading...
