33
Initial Setup
Changing the Input source
Source List
MENU m → Applications → Source List → ENTER E
Source
-
The displayed image may differ depending on the model.
Source allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen
of the selected source.
―
The input source can also be changed by using the SOURCE button on the remote control.
―
The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
―
To view detailed information about connected source devices, press the TOOLS button from the Source page.
―
Refer to page 81 for details about the Source List.
TV
HDMI1
HDMI2 AV
PC
USB
After powering on the product for the first time, configure basic settings such as the language, channel and time.
Language → Regional Settings → Channel Source → (Auto Tuning does not appear if Set-top box or No TV(Signage Only) is selected.) → Network Settings → Clock → Auto Power Off → Setup Complete!
―
Refer to page 97 for details about the Setup.
To Next Page
Loading...
