26
Intrusion Detection Function
This function generates the alarm sound when an attempt is made to forcefully open the door from
the inside or the outside.
(This is a basic function of the lock, and cannot be separately set or released.)
Releasing the Emergency Sound
Built-in Fire Detection Function
This function generates the alarm sound when fire is detected so that the residence can quickly
respond.
(The built-in fire detection function is a basic function of the lock, and cannot be released by the
user.)
Open the battery cover of the Inner Body
and take out the batteries, or press the
[Register] button.
Apply the registered card or key tag to the
card reader, or enter the password and then
press the [º] button.
[Inside]
[Outside]
Or
When fire occurs, the temperature sensor detects it and flashes the
[OPEN] button while generating the alarm sound.
The door is automatically opened after the alarm sound has stopped.
(The lock resumes normal operation if the inside temperature returns to
a normal level.
“Peep”
(for 15 seconds)
Or
The built-in fire detection function is activated when the temperature rises around 60℃,
which may differ depending on the installation environment.
If the door is forcefully opened while locked, the
door opening sensor detects it and generates
the alarm sound.
“Peep”
(for 5 minutes)
To Next Page
Loading...
