26_ operating
Setting the Time
The clock displays the current time. You can change the current time
with the following steps.
■
You can only set the time using the remote control.
Remote Control Configuration Sequence
Blinks
1. Press the Clock button.
- The current time is displayed.
Blinks
Decrease
Increase
2. Press the Clock button. Press
the
or
button to set the
hour.
Blinks
Decrease
Increase
3. Press the Clock button. Press
the
or
button to set the
minutes.
Blinks
4. Press the Clock button.
- The value you set will
blink and the settings are
completed.
Canceling the Settings
- Press the Start/Stop button to cancel the settings and exit
Time Set mode.
Remote Control
- If there is no input for 1 minute while you are setting the time,
the cleaner exits Time Set mode automatically.
DJ68-00630D (EN)-00.indd 26 2014. 7. 23. �� 6:14
To Next Page
Loading...
