44_ maintain
Cleaning the Driving Wheel
You must turn off the Power Switch at the bottom of the main
unit before cleaning the robot.
■
If the Robot vacuum suddenly starts to zigzag, there may be foreign
substances stuck on the driving wheel.
1. When cleaning the driving wheel, place a soft cloth on the floor and
flip the main unit, placing it down carefully.
2. Check for foreign substances and remove them using a stick or a
pair of blunt nippers if necessary.
DJ68-00630D (EN)-00.indd 44 2014. 7. 23. �� 6:14
To Next Page
Loading...
