maintain _39
04 MAINTAIN
CLEANING THE ROBOT VACUUM
Please keep the cleaning and maintenance methods in mind
■
When the Power Switch is damaged, please contact the service
agent so that it does not cause any accidents.
■
Do not use any means or mechanical devices not installed by the
manufacturer that could accelerate the deformation of the Robot
vacuum.
■
Always turn off the power switch at the
bottom of the main unit before cleaning the
Robot vacuum. The Robot vacuum could
operate suddenly and cause an injury.
Cleaning the Sensor Window and the Camera
You must turn off the Power Switch at the bottom of the main
unit before cleaning the Robot vacuum.
■
Never spray water, thinner, benzene etc. directly onto the main unit
of Robot vacuum.
■
Lightly wipe the sensor window or camera
using a soft cloth.
Front Sensor window
Camera
Front Sensor Window and
Camera
Cliff Sensor Window Rear Sensor Window
Maintain tools and filters
DJ68-00630D (EN)-00.indd 39 2014. 7. 23. �� 6:14
To Next Page
Loading...
