English _55
● MENU SETUP
3. Check the checkbox next to a network camera that you want to connect to.
` You can select all of the network cameras in the list and provide <ID> and <Password> all at once.
J
` Registering camera with user account other than admin may restrict camera function.
4. Provide the <ID> and <Password> for the selected network camera.
5. Press <Register> to register the selected camera.
To manually search for and register a network camera
1. Press <Add Manually> in the bottom left corner of the "Add Camera Automatically" window.
2. The Manual Search window appears.
3. Select a protocol.
The input items may differ depending on the selected protocol.
•
SAMSUNG : Comply with the internal network protocols adopted by Samsung Techwin.
•
ONVIF : Means the camera supports ONVIF protocols. When connecting a camera that its name cannot be
found from the list, select <ONVIF>.
M
` Time difference between the ONVIF camera and NVR exceeds more than 2 minutes, the camera cannot be connected. In this
case, synchronize the ONVIF camera's time to the NVR or set times of both camera and NVR to a same NTP server (if in the
same time zone), or make the NVR an NTP server.
•
RTSP : Comply with RFC 2326, one of "Real Time Streaming Protocol (RTSP)" for real-time streaming.
4. If you select the <SAMSUNG> protocol, check options as necessary.
•
Model : Select a camera model.
-
Samsung Network Camera/Encoder : Means the camera/encoder supports Samsung Techwin's SVNP
protocol. When connecting a camera that does not appear in the camera list, select Samsung Netowrk
Camera/Encoder.
` However, you must select the correct model name of the camera, if it's in the list. Some of obsolete camera models may not be
supported.
To Next Page
Loading...
