To Next Page
T
tyler61Sep 2, 2025
Why does my Samsung SRN-470D DVR keep showing the logo?
- CCharles SheltonSep 2, 2025
Check if the 4 pin cable is properly connected to the front panel.
Why does my Samsung SRN-470D DVR keep showing the logo?
Check if the 4 pin cable is properly connected to the front panel.
What does the “NO HDD” icon mean on my Samsung SRN-470D DVR?
Check the HDD for connection.
Why is the REC button not working on my Samsung SRN-470D remote?
Check if there is free space on the HDD for recording. Also, verify that the record mode is set to ON in the record mode settings.
How to stop alarm on Samsung SRN-470D DVR?
Press the [MENU] button on the remote and cancel the alarm. To release the event monitoring mode: set the duration of the event monitoring to Off in Monitoring Mode. To release the alarm sound: deactivate the alarm sound in Event Record Mode – Alarm (Camera Event /Video Loss). To release the event: set the mode to Off in Event Record Mode – Alarm (Camera Event /Video Loss).
What to do if some Samsung DVR channels show a black screen?
Check if the camera is properly supplied with power. Check the video output by connecting to the camera's webviewer. Ensure the network port is properly connected and the network setting is correct. Try changing to a hub supporting Gigabit. Check if the 4-pin cable is properly connected to the front panel.
Why is my Samsung SRN-470D camera not connecting?
Check that the network cable is properly connected. Make sure you've set the Network – Connection Mode. Verify the IP settings of both the PC and the camera. Try running a Ping Test. Also, check for any other devices on the network using the same IP address.
How to fix no video on my Samsung SRN-470D connected monitor?
First, ensure all necessary cables are correctly connected to the monitor. If the issue persists, try this sequence: press [STOP (@)], then [ZOOM], then [STOP (@)] again, and finally [ZOOM]. Then press [MENU] to bring up the default resolution dialog. From there, change the current resolution to a different one and apply the change.
General
