① During Playback, Press the PAUSE button to pause the playback and press the COPY button. You will be asked
whether to store a Still image or Video (Figure 1). Select Video and set the duration of the copy to store the data into
the HDD, and select the backup device - either USB memory stick or CD-RW. Select the device that you want to save
it to and it will be saved to that device.
② Press the SEARCH button and select ARCHIVE to display the calendar. Select a desired date and press the ENTER
button to display Figure 2.
③ Select a desired list to be backed up and the image is displayed. Select the backup device - either USB memory stick
or CD-RW. When backup is completed, Figure 3 is displayed.
4.5.7.2 Video backup: Only available during Playback mode
Figure 3
Figure 1
Figure
2
Figure 3
4.6 Playback
4.7 PTZ
REC Button for manual recording.
STEP Playback position moves 1 frame forward/back during Pause.
PLAY/PAUSE Button for playback and pause.
STOP Button for stop
FAST Button for fast forward.
DIR Button to select and change the direction of play in playback.
Notes
• During playback, a few frames may be missing depending on the image quality, but
this is not a defect of the unit.
Press the PTZ button on the selected Full Live Screen, and adjust the Pan, Tilt, or Zoom of a camera. The PTZ function
can be controlled by the function buttons of the front panel or by the remote controller. The PTZ function can be
controlled when a PTZ camera is correctly connected to the RS-485.
Chapter 4. Operating
Chapter 4. Operating
To Next Page
Loading...
