Network
Electrical Specification
Items SVR-450 SVR-940
General
Live Screen: Monitoring
Playback Screen: Search
Menu Setting: Menu setting available (CMS S/W : option)
Access Method: Dedicated Viewer
Protocol: TCP/IP, DHCP
Interface: Ethernet (10/100Mbps), ADSL
Concurrent Users: Up to 4 users (depending on the network
environment)
PC Requirements
CPU: Pentium IV 1.2GHz or over (2.0GHz or over recommended)
Memory: 256MB or over (512MB or over recommended)
HDD: Minimum 10GB or over
OS: Windows 2000 or later recommended
Monitor: 1,024_768 Pixels
LAN Interface: 10/100 Base-T (RJ-45)
Items SVR-450 SVR-940
Power DC 12V Adaptor (SVR-450)
100~127V/200~240V, 50/60Hz
Power Consumption Approx. 25W 65W
Search and Playback
Items SVR-450 SVR-940
Search Mode
Search by Time: Year, Month, Date, Hour, Minute
Search by Channel: per channel
Search by Event: Alarm, Motion Detect
Search by the oldest data: The first recording image
Search by the most recent data: The last recording image
Search by bar: Using the search bar
Speed & direction of Playback Forward and Reverse
Fast Search Rewind (X2, X4, X8), Rewind (X2, X4, X8)
STEP Search Search in 1 second increments
Pause and Frame Playback Playback pause, Playback by frame in the pause status
Chapter 2. Summary Chapter 2. Summary
User Environment
Exterior
Connection Terminals
Accessories
Items SVR-450 SVR-940
Operating Temperature
Storage Temperature
Humidity
5˚C~ 40˚C
10˚C~60˚C
30% ~90%(without dewfall)
Items SVR-450 SVR-940
Material
Dimensions
Steel Case
260(W) X 350(D) X 65(H)mm
Weight About 5.5Kg 11Kg
Items SVR-450 SVR-940
Accessories to be supplied
Network Viewer Program CD
User Manual
Remote Control & Battery
Brackets and screws for HDD plate
Adaptor (for SVR-450), Power cable
Items SVR-450 SVR-940
Video Input BNC(4EA) BNC(9EA)
Monitor Output BNC(1EA)
Loop out (9EA), Spot (1EA)
S-VHS
VGA Output (PC Monitor)
Audio Jack
USB Port
9-Pin DSUB
6-Pin Terminal sector
8-Pin Terminal sector
2-Pin Terminal sector
Termination Switch (JP2
Termination)
LAN Input
15-Pin DSUB
RCA Input (4), RCA Output (1)
USB2.0 (Firmware Upgrade/Copy)
RS-232C (Standby)
RS-422/485 (External control, PTZ)
Alarm Input Terminal
Alarm Output Terminal (Motion Detect, Sensor: CM, NO, NC)
RS-422/485 Terminal Resistance Switch (RS-422/485 termination
can be set using jump setting after opening the top cover)
RJ-45(Network)
AC / DC Input 12v AC Adaptor AC110V~240V
To Next Page
Loading...
