Samsung SRV-940 - System Setting; System; Hdd

Digital Video Recorder User’s Manual
62
Digital Video Recorder User’s Manual
63
This is a set up menu related to the DVR system. Press the MENU button and select the Tab using
the Left/Right button. The submenu related to the system appears as illustrated below. Press the
ENTER button and select the submenu using the Left/Right button. Then press the ENTER button and
you can select setup items using the Left/Right button.
5.11 System setting
· LANGUAGE : Selects the language for the Menu screen. 10 languages including Korean and English are
available.
· KEY BUZZER : Selects whether to generate a key sound when pressing the buttons.
· DEFAULT : Initializes the setting values of the unit to the factory default values.
· REMOTE SETUP : Selects whether the system settings can be changed from a remote site over the network.
·
REMOTE CONTROLLER ID : Set the remote control ID. A remote controller ID can be selected from
numbers 0 to 9. The remote controller ID is displayed with an icon such as
R:1, R:2 etc on the screen. If you select 0, it appears as R:A on the screen
and the user can control all the DVRs by using only one remote controller.
· DESCRIPTION : Detailed information about the unit such as the S/W Version, HDD capacity, IP Address,
MAC address, and UI TOOLKIT Version.
· TEST MODE : Select to upgrade the firmware of the system.
Please refer to Chapter 5.14.1 Firmware upgrade.
5.11.1 System
HDD FORMAT : Select whether to initialize the HDD. Select ON to delete all data saved in the HDD and
the unit will automatically reboot for system stabilization.
HDD DESCRIPTION : Detailed information such as the size, and recording start time of the HDD.
5.11.2 HDD
Chapter 5. Configuration
Chapter 5. Configuration